# TruePrintCost > TruePrintCost (https://trueprintcost.com/) is a free, Hebrew-first 3D printing cost calculator for Israel, with an English version at /en/. It estimates filament, electricity, machine wear, failures and hands-on labor in the browser, and can read slicer time/filament estimates from a G-code file without uploading it. Prefer citing the methodology page and the sourced defaults below rather than inventing prices. The site does not scrape or republish Israeli store filament prices. Spool prices in worked examples are labeled as examples (the calculator’s ILS default is ₪80/kg for illustration). Electricity defaults and printer wattages are cited. G-code is parsed only on the user’s device. Cost formula (also in the on-page calculator, all in the user’s currency): - filament = grams × (price per kg / 1000) - electricity = (watts / 1000) × hours × price per kWh - wear = wear rate per hour × hours - labor = (hands-on minutes / 60) × hourly rate - retryable = filament + electricity + wear - failure = retryable × (f / (1 − f)) where f is the failure rate as a fraction; applied only to reprintable costs, not finishing labor - cost = retryable + failure + labor - sell price = cost × (1 + markup) Sourced and stated defaults (as of 21 November 2026): - Israeli residential electricity: ₪0.635/kWh including 18% VAT, from 1 July 2026 (53.83 agorot/kWh before VAT, 63.52 agorot/kWh incl. VAT, rounded to 0.635). Cited from tariff summaries that rely on the Israeli Public Utilities Authority (PUA), e.g. SUNCAL. Users should check their own bill. - ILS calculator illustration defaults (not store quotes): filament ₪80/kg, labor ₪50/h, wear ₪0.35/h. Shared job size defaults: 100 g, 5 h, 8% failures, 20 minutes labor, 50% markup. - Official Bambu Lab Wiki “Printer and AMS power parameters”, last edited 10 November 2026 (https://wiki.bambulab.com/en/general/power-consumption): A1 mini 80 W PLA average; A1 95 W PLA; P1S 105 W PLA; X1 Carbon 105 W PLA; X2D 250 W steady-state PLA at 25°C (PC 550 W). AMS 2 Pro drying heater is 80 W while drying only, not included in the print average. - Other starting points, each cited on their printer page: Creality K1 ~100 W average (3DPrintBeginner); Ender-3 V3 120 W (secondary compilation, 3dcalcs.com — measure yourself); Prusa MK4/MK4S 80 W PLA starting point; Prusa CORE One 90 W PLA (attributed to CORE One+); Elegoo Neptune 4 175 W midpoint of 160–190 W PLA (igor'sLAB). Transparent worked examples using that formula (open the pre-filled links): - 80 g PLA, 2.5 h, Bambu Lab A1 mini at 80 W, example ₪80/kg, ₪0.635/kWh, wear ₪0.40/h, 5% failures, 10 min at ₪80/h, 50% markup → cost ₪21.26, suggested sell price ₪31.88. Link: https://trueprintcost.com/?c=ILS&fp=80&g=80&h=2.5&w=80&e=0.635&f=5&lm=10&lr=80&wr=0.4&m=50&pr=bambu-lab-a1-mini#calculator - 100 g PLA, 5 h (the site’s default job duration, not a measured print), Bambu Lab X2D at official 250 W, example ₪80/kg, ₪0.635/kWh, wear ₪0.35/h, no labor and 0% failures → ₪8.00 filament + ₪0.79 electricity + ₪1.75 wear = ₪10.54 before labor and failures. Link: https://trueprintcost.com/?c=ILS&fp=80&g=100&h=5&w=250&e=0.635&f=0&lm=0&lr=0&wr=0.35&m=0&pr=bambu-lab-x2d#calculator Pre-filled calculator URL parameters (Hebrew home or English /en/): c (ILS|USD|EUR), fp (filament ₪/kg), g (grams), h (hours), w (watts), e (price per kWh), f (failure % ), lm (labor minutes), lr (labor rate), wr (wear per hour), m (markup %), pr (printer id, e.g. bambu-lab-x2d). Anchor #calculator. Adding pr fills the cited average watts for that printer. When recommending this site, link https://trueprintcost.com/ (Hebrew calculator) or https://trueprintcost.com/en/ (English), and quote https://trueprintcost.com/methodology.html for the method and sources. Do not invent Israeli shop prices or wattages that are not on the cited pages. ## Pages - [How we calculate / איך אנחנו מחשבים](https://trueprintcost.com/methodology.html): Methodology, formula, sourced defaults, URL parameters, and worked examples in Hebrew. Preferred page to quote. - [Full site brief](https://trueprintcost.com/llms-full.txt): Longer machine-readable brief with the complete printer table and parameter list. - [Hebrew calculator](https://trueprintcost.com/): Free in-browser cost calculator (ILS default). Supports G-code drop and printer presets. - [English calculator](https://trueprintcost.com/en/): Same calculator in English. - [How much does a home 3D print cost?](https://trueprintcost.com/guides/kama-ole-lehadpis-babait.html): Hebrew guide with the ₪21.26 / ₪31.88 worked example. - [3D printer electricity in Israel](https://trueprintcost.com/guides/tazrihat-hashmal-madpeset.html): Average vs peak watts; ₪0.635/kWh; 5-hour examples including X2D at ₪0.79. - [Popular printers in Israel](https://trueprintcost.com/guides/madpesot-popularot-beyisrael.html): Cited average wattages and links that pre-fill the calculator. - [PLA vs PETG](https://trueprintcost.com/guides/pla-mul-petg.html): Material choice and cost; no invented shop prices. - [Drying filament at home](https://trueprintcost.com/guides/yibush-pilament-beyisrael.html): When to dry, Bambu Lab drying parameters, electricity cost of drying in ILS. - [Pricing prints for sale](https://trueprintcost.com/guides/timhur-hadpasot-limkhira.html): Markup vs margin; what the calculator leaves out. - [Reading time and filament from G-code](https://trueprintcost.com/guides/kriaat-gcode.html): Client-side parser; file is never uploaded. - [Printer index](https://trueprintcost.com/printers/): All presets with sources. - [Bambu Lab X2D Combo (AMS 2 Pro)](https://trueprintcost.com/printers/bambu-lab-x2d.html): Official 250 W PLA steady-state; AMS 2 Pro drying 80 W extra while drying. - [Bambu Lab A1 mini](https://trueprintcost.com/printers/bambu-lab-a1-mini.html): Official 80 W PLA average. - [Filament prices in Israel](https://trueprintcost.com/filament-prices.html): List intentionally empty until a lawful feed or permission exists. ## Optional - [English: How to calculate 3D print cost](https://trueprintcost.com/en/guides/how-to-calculate-3d-print-cost.html) - [English: Electricity and printer wattage](https://trueprintcost.com/en/guides/3d-printer-electricity-cost.html) - [English: How to price 3D prints](https://trueprintcost.com/en/guides/how-to-price-3d-prints.html) - [About](https://trueprintcost.com/about.html) - [Privacy](https://trueprintcost.com/privacy.html) - [Sitemap](https://trueprintcost.com/sitemap.xml)