How to price 3D prints for sale

Cost tells you the floor. Price is a separate decision. This page explains markup, margin, marketplace fees, and the extras the calculator deliberately leaves out.

In short: Calculate cost first, then choose a price. On the published example, cost is ₪21.26; a 50% markup is ₪31.88 (cost × 1.5). A 50% margin would be a different, higher price. The calculator uses markup and leaves out packing, shipping, marketplace fees and sales tax.

Start with a full cost — filament, electricity, wear, a failure allowance, and hands-on labor — using the cost method or the calculator. Charging only for filament is the most common way makers lose money on “cheap” prints.

Markup is not margin

The calculator uses markup: a percentage added on top of cost.

sell price = cost × (1 + markup)
example: $16.50 × (1 + 100%) = $33.00

Margin is profit as a share of the selling price. To hit a target margin m:

sell price = cost / (1 − m)
example: $16.50 / (1 − 0.50) = $33.00

Those two examples are not the same idea with the same percentage. A 50% markup on $16.50 is $24.75. A 50% margin on $16.50 is $33.00. People often say “I want 50% profit” and then add 50% to cost, which is a 33% margin, not 50%. If you want a margin, convert it first, or pick a markup and look at the profit line the calculator already shows (price minus cost).

If cost is $16.50Listed priceProfitMargin (profit ÷ price)
0% markup (break-even)$16.50$0.000%
50% markup$24.75$8.2533.3%
100% markup$33.00$16.5050%

Marketplace fees need to be grossed up

Etsy, eBay, Amazon Handmade, PayPal and similar platforms take a percentage of the sale price, sometimes plus a fixed fee. If you add your markup and then let the platform take 10% of the listed price, you no longer earn the markup you planned. The listed price has to be raised so that the fee comes off and the intended markup remains:

listed price = cost × (1 + markup) / (1 − fee share)

Example: cost $16.50, 100% markup, 10% platform fee. Without the fee you would list $33.00. With a 10% fee: 33.00 / 0.90 = $36.67. After the platform keeps 10%, you still receive $33.00. A flat $0.30 payment fee would be added on top, then grossed up the same way. This calculator does not yet apply marketplace fees, so do that step yourself before you publish a listing.

Fee schedules change. Read the current seller fee page for the platform you use; do not copy a percentage from memory or from an old blog post.

What the calculator leaves out on purpose

For a one-off commission, it is usually cleaner to quote design and printing as two lines. For a design you will sell many times, spread the design hours over a conservative sales guess, not over an optimistic one.

A practical way to choose the markup

There is no official “correct” markup for a 3D print. Hobby gifts, local commissions, and Etsy competition all clear different prices. A workable approach:

  1. Never go below full cost, labor included, unless you are intentionally doing a favor.
  2. Look at similar sold listings, not just asking prices, in your market and currency.
  3. Try a markup, gross up for fees and packing, and see whether the result still looks reasonable next to those listings.
  4. If it does not, either simplify the job (less finishing, cheaper material) or decline it. Matching a $5 listing that ignored labor is not a pricing strategy.

The worked example in the cost guide ends at a $33.00 suggested price on a $16.50 cost (100% markup, no platform fee). That number is a demonstration, not a recommended market rate.

Track a few jobs and then adjust

Your failure rate and hands-on minutes will be wrong at first. After ten or twenty jobs, compare what you thought you would spend with what you did spend. If one in eight prints actually fails, put 12.5% in the calculator, not the default 8%. If support removal always takes 25 minutes, stop typing 10. The calculator is only as honest as the inputs.

Open the calculator · How cost is calculated

Affiliate placeholder

Tagged links for packing materials, filament, or a postal scale can go here after the site owner’s affiliate accounts are approved. No associate tags have been invented.

Frequently asked questions

Markup or margin?

Markup is added on top of cost: 50% on ₪21.26 is ₪31.88. Margin is profit as a share of the selling price; a 50% margin on the same cost would require ₪42.52.

What is left out?

Packing, shipping, platform fees, sales VAT if you must charge it, rent, paid software, and design time.