How to calculate 3D print cost

The filament on the roll is only part of the bill. A useful cost also includes electricity, machine wear, the prints that fail, and the minutes you actually spend with your hands on the job.

In short: Using the site formula, the published Hebrew worked example — 80 g PLA, 2.5 h, A1 mini at official 80 W, example ₪80/kg, ₪0.635/kWh, wear ₪0.40/h, 5% failures, 10 min at ₪80/h, 50% markup — costs ₪21.26, with a suggested sell price of ₪31.88. Method and sources: How we calculate.

This is the same method used by the TruePrintCost calculator. You can do it on paper. The sections below walk through each line, then a complete example whose arithmetic is easy to check.

1. Filament

Divide what you paid for the spool by its net filament weight, then multiply by the grams this job uses:

filament cost = grams × (spool price / spool weight in grams)

Or, if you think in kilograms: grams × (price per kg / 1000). Use the price you actually paid, including tax and shipping if those were part of getting the roll to your door. Use the slicer’s material estimate, and include supports, brim, skirt, raft and any purge or waste the slicer already counted. If you regularly throw away skirts or wipe lines that the slicer does not list, add those grams yourself.

Density matters only when you are estimating grams from a model’s volume. The calculator does not guess weight from an STL; it trusts the number you type.

2. Electricity

Printers do not draw their power-supply rating all day. Heaters cycle once the bed and nozzle are at temperature, so the useful number is average watts over the whole print:

electricity cost = (average watts / 1000) × hours × price per kWh

Get average watts from a plug-in energy meter: kWh used ÷ hours × 1,000. Get the kWh price from your bill, including taxes. The electricity guide explains how to measure this and lists recent household rate examples for the United States, the EU and Israel. For many desktop PLA jobs, electricity is a small line compared with filament and labor — but it is still real money, and it grows on long, hot, or enclosed prints.

3. Machine wear

The printer itself, plus nozzles, belts, build sheets and the occasional repair, wear out with use. A simple way to spread that cost is:

wear rate per hour = printer price / expected lifetime hours
wear cost = wear rate × print hours

If you also budget maintenance separately (a box of nozzles every few hundred hours, a new bed, a belt kit), you can fold those into the same hourly rate. A $400 machine that you expect to use for 4,000 hours is $0.10 per hour before extras. The calculator’s optional helper does this division for you. The rate is a judgment, not a measurement — be honest about how long the machine will last in your shop.

4. Failed prints

Some attempts fail: a peel, a clog, a power blip, a warping corner. The material, electricity and wear on those attempts still cost money. If a fraction f of attempts fail, you need 1 / (1 − f) attempts for each good part. The surcharge on reprintable costs is therefore f / (1 − f), not just f.

At a 20% failure rate, f / (1 − f) = 0.25. Each good print carries a 25% extra on filament, power and wear. A flat “add 20%” would undercount. This calculator does not apply the failure rate to labor, because you usually slice and finish a successful part once, even if the printer had to try twice. If a failure also wastes a lot of your time (a 14-hour print that dies at hour 13), raise the failure rate for that quote rather than pretending the average still holds.

5. Labor

Count only hands-on time: importing the file, slicing, preparing the plate, starting the job, removing the part, cleaning supports, light sanding, and packing. Do not count the hours the printer runs unattended unless you are genuinely watching it. Then:

labor = (minutes / 60) × your hourly rate

The rate is your decision. Set it to zero if you only want machine cost. If you designed the model from scratch, that design time is a separate job and is not in this calculator — see the pricing guide.

6. Cost and suggested price

cost = filament + electricity + wear + failure allowance + labor
sell price = cost × (1 + markup)

Markup is a percentage on top of cost. It is not a profit margin, and it does not automatically cover Etsy, PayPal or shipping. Those have to be added or grossed up afterwards.

Worked example

Use these inputs:

InputValue
Filament price$25 / kg
Filament used100 g
Print time5 hours
Average power100 W
Electricity$0.20 / kWh
Wear rate$0.20 / hour
Failure rate20%
Hands-on time30 minutes
Labor rate$24 / hour
Markup100%

Step by step:

Open this example in the calculator. The “Load worked example” button on the homepage loads the same numbers.

In this example labor is most of the cost, which is typical for a short print with real finishing time. On a long overnight job with a minute of plate work, filament, wear and the failure buffer take a larger share. Electricity is only ten cents here — visible, but not the line that usually breaks a quote.

What this method leaves out

Packaging, shipping, sales tax, and marketplace or payment fees are not in the cost above. Design time, photography, and customer messages are not in it either. If you sell on a platform that keeps a percentage of the sale price, you must raise the listed price so the markup survives after the fee. The pricing guide covers that next.

Affiliate placeholder

A tagged link to a 1 kg filament spool and a plug-in energy meter will go here after the site owner’s affiliate account is approved.

Frequently asked questions

What does the calculator include?

Filament, electricity, machine wear, a failure add-on only on those reprintable costs, and hands-on labor. Shipping, marketplace fees and sales VAT are out of scope.

What is the Israeli electricity default?

₪0.635/kWh including 18% VAT as of 1 July 2026, from tariff summaries that cite the Israeli Public Utilities Authority. Use your own bill when you can.